Overview
Connections on the control unit
Fig. 2: Connections on the control unit
A
Supply cable
B
Vehicle cable
The supply cable A is removed and plugged in at the
top of the control unit.
The vehicle cable B is removed and plugged in at the
bottom of the control unit.
Charger control unit
Fig. 3: Control unit
A
Power button
B
Status LEDs
C
Display
The charger can be switched on and off using the
Power button A (Fig. 3).
The status LEDs B (Fig. 3) show the status of the
charger.
Communication with the charger takes place via the
display C (Fig. 3). It shows information and error
messages.
Displays and controls on the dis-
play
Fig. 4: Charger display
A
Status bar
B
Information area
C
Menu bar
A brightness sensor controls the brightness of the
display. The brightness adjusts automatically to the
ambient lighting conditions.
Status bar
Various symbols can be displayed in the status bar.
The following overview shows the meaning of the
status bar symbols.
Overview
9