Connections On The Control Unit - Porsche Mobile Charger Plus Driver Manual

Hide thumbs Also See for Mobile Charger Plus:

Operating and installation manual (652 pages)

Manual (918 pages)

Owner's manual (41 pages)

Table Of Contents

Table of Contents

In this configuration, the charger and energy manager

each connect to a router via PLC (Powerline Commu-

nication), the energy manager optionally directly via

Ethernet or WiFi. The Web Application of the energy

manager and of the charger can be accessed by the

device via the router.

Operation of the charger via the buttons on the

device or via the Web Application of the charger

remains possible. In this case, however, the energy

manager settings for limiting the charging current are

overruled.

g Refer to chapter "Energy manager" on page 19.

Fig. 4: Connection of the charger and energy manager via a

router (application example)

Porsche Mobile Charger Plus

Electrical socket

Network connection via power line (PLC)

PLC adapter

Network connection via Ethernet

Router

WiFi

Mobile device

Energy manager

Network connection via Ethernet (alternative)

Variant 4: Direct connection of the charger

and energy manager via PLC

Because the energy manager features an integrated

PLC adapter, the connection between the charger

and the energy manager can also take place directly

via PLC. Connection of the energy manager to the

router then once again takes place via WiFi, PLC or

Ethernet.

With the mobile device, access to the Web Applica-

tion of the energy manager (and charger) then takes

place as in variants 2 and 3 via the router. Operation

of the charger via the buttons on the device or via the

Web Application of the charger remains possible. In

this case, however, the energy manager settings for

limiting the charging current are overruled.