Advertisement
Step 12
You will need:
2 x Steel Tubes
(H9)
2 x Tube Cover
(H10)
2 x Washers
(H11)
2 x Nuts
(H12)
Carefully lift glass into place over Steel Tube (H9) and Tube Cover (H10). Fasten with Washer (H11)
and Nut (H12). Tighten firmly with socket wrench.
Step 13
You will need:
2 x Washers
(H11)
2 x Nuts
(H12)
2 x Long Threaded
Rod
(H13)
Carefully turn over the unit.
Align Panel Glass Divider on aluminium block, then insert 2x Long Threaded
Rod (H13) and tighten by hand. Attach 2x Washers (H11) and Nuts (H12)
and tighten with Socket Wrench.
(H12)
(H11)
(H13)
(H9)
(H10)
(H11)
(H12)
8
Advertisement
