Advertisement
Step 4
You will need:
4 x Small Cam
Bolts
(H2)
8x Big Cam
Bolts
(H3)
8 x Wooden
Dowels
(H4)
Insert 4x Small Cam Bolts (H2), then 8x Big Cam Bolts (H3) and 8x Wooden Dowels (H4)
into the Long Base Panel (P1).
Step 5
You will need:
8 x BigCam
Nuts
(H3)
4 x Small Cam
Nuts
(H2)
(P4)
Insert 4x Small Cam Nuts (H2) into the Back Panels (P4) and 8x Big Cam Nuts (H3)
into the Side Panels (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push the Back and Side Panels into place and tighten the cam nuts.
Repeat for both drawer boxes.
Mallet
(H2)
(H2)
(H3)
(H4)
(H4)
(H3)
(P3)
(H2)
(H3)
(H4)
(P1)
(H3)
(H4)
(H4)
(H3)
(P4)
(H2)
(H2)
(H3)
(H4)
(H4)
(H3)
(H4)
(H3)
(P3)
(H3)
Page 5
Advertisement
