Advertisement
12 x Dome Head
Screws
(H1)
Carefully align the edges of the Wooden Blocks (P2) with the edges of Long Base Panel (P1), then
fix with 12 x Dome Head Screws (H1)
8x Small Cam Bolts
(H2)
Insert 8x Small Cam Bolts (H2) into 4x Side Panels (P3).
Step 3
You will need:
8 x Small Cam
Nuts
(H2)
This is how a cam nut works........
Insert the 8x Small Cam Nuts (H2) into the Back Panels (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push the Side Panels into place and tighten the cam nuts.
Repeat for both drawers boxes.
The head of the bolt
goes into the wide
mouth of the cam nut.
You then turn the nut
so the narrow part
closes over the bolt.
(P1)
(P3)
(H2)
(P4)
(P3)
(H2)
Advertisement
