Advertisement
Step 16
You will need:
10 x Small Cam Nuts
(H2)
Insert the 10x Small Cam Nuts (H2) into the Drawer Sides (P10) and Drawer Support (P11).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push the Drawer Side and Drawer Support into place and tighten the cam nuts. Repeat for both drawers.
Step 17
10 x Long
Screws
(H14)
Insert the Drawer Shelves (P12) into the grooves on Drawer Sides and Drawer Fronts,
then attach Drawer Backs (P13) with 10x Long Screws (H14). Repeat for both drawers.
Step 18
8 x Short Timber
Screws4(H5)
4 x Drawer Runners
(H15)
Attach 4x Drawer Runners (H15) to the underside of the drawers,
with 8x Short Timber Screws (H5). Repeat for both drawers.
(P10)
(H2)
(H2)
(H14)
(H14)
(H5)
(P11)
(H2)
(P9)
(P13)
(P12)
(H5)
(H5)
(H5)
Page 10
(P10)
(H14)
(H15)
Advertisement
