Advertisement
Step 6
You will need:
12 x Short Timber
Screws
(H5)
4 x Drawer Runner
Tracks
(H6)
Attach 4x Drawer Runner Tracks (H6),
to Side Panels with 12x Short Timber
Screws (H5).
Note:
Attach screws loosely. Then tighten the
front screw first, making sure the screw
aligns in the centre of the hole in the drawer runner.
Then tighten the other screws.
Step 7
You will need:
4x Small Cam
Bolts
(H2)
8 x Big Cam
Bolts
(H3)
8x Wooden
Dowels
(H4)
Insert 4x Small Cam Bolts (H2), 8x Big Cam Bolts (H3) and 8x Dowels (H4) into Drawer Top Panels (P5).
Step 8
You will need:
4x Small Cam
Nuts
(H2)
8x Big Cam
Nuts
(H3)
Insert 4x Small Cam Nuts (H2)
into the Back Panels, then
8x Big Cam Nuts into Side Panels (P3).
Rotate the cam nuts so the arrows point
towards the incoming cam bolts.
Push the Drawer Top Panel (P5) into place and tighten the cam nuts.
(H5)
(H5)
(H2)
(H2)
(H3)
(H4)
(H4)
CR
(H5)
(H5)
(H5)
(H5)
(H3)
(H4)
(P5)
(H3)
(P5)
(H2)
(H3)
(H3)
(P3)
front
(H6)
(H4)
(H3)
(H3)
6
Advertisement
