Advertisement
UPS5000-E-(25 kVA-75 kVA)-BF
User Manual
Step 2 Connecting the signal cables to each single UPS in a parallel system.
----End
3.4 Installing Batteries
Installing Battery Modules
Step 1 Remove filler panels.
Issue 07 (2019-12-13)
Figure 3-57 Connecting signal cables in a dual-bus system
To prevent electric shocks, install battery modules after cables are connected.
To prevent electric shocks, ensure that the rear cover of the cabinet has been installed
before installing battery modules.
Before installing battery modules, carefully read the battery safety precautions.
Place the battery modules in a correct way to prevent vibrations and shocks.
Install the battery modules from the lower layer to the upper layer to prevent falling over
due to top-heaviness.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
87
Advertisement
