Huawei UPS5000-E-BF Series User Manual page 66

UPS5000-E-(25 kVA-75 kVA)-BF
User Manual
Figure 3-10 Removing rubber plugs
Step 7 Insert four M12x115 expansion bolts into the expansion bolt holes in the floor, and tighten the
expansion bolts, as shown in
Figure 3-11 Tightening expansion bolts
Step 8 Reinstall the rear panel of the cabinet.
----End
Non-Secured Installation
Step 1 Lower the four leveling feet at the bottom of the cabinet by using a wrench until all the four
castors at the bottom are lifted from the ground and the leveling feet bear the whole cabinet
weight, as shown
Issue 07 (2019-12-13)
Figure 3-11.
Figure 3-12.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
57