Cobalt Digital Inc 9061 Product Manual page 95

Operating Instructions
Table 3-2 9061 Function Submenu List — continued
• Surround Mix Ratio Control
• Mono Mixer Selection
9061-OM (V4.9)
9061 Function Submenu List and Descriptions
(continued)
Adjusts the attenuation ratio of surround-channel content from 5-channel
source that is re-applied as Lo and Ro content to the DM-L and DM-R
stereo mix.
• Minimum attenuation setting (-0.0 dB) applies no ratiometric reduction.
Surround-channel content is restored with no attenuation, making Lo
and Ro content more predominate in the overall mix.
• Maximum attenuation setting (-10.0 dB) applies a -10 dB ratiometric
reduction of surround-channel content. Surround-channel content is
restored at a -10 dB ratio relative to overall level, making
surround-channel content less predominate in the overall mix.
(0.0 dB to -10.0 dB range in 0.1 dB steps; default = -3 dB)
Note: Default setting of -3.0 dB is recommended to maintain
surround-channel predominance in downmix representative to that
of the original source 5-channel mix.
Separate drop-down lists for Left and Right inputs allow selected
embedded, AES, analog, or the DM-L / DM-R input channels to provide
an additional mono-mixed channel.
The resulting mono mix (Mono) is available as an audio source for any of
the 32 destination embedded or AES output channels as shown below.
Note: Selection of any two channels for mono mixing in no way affects the
source channels themselves.
9061 PRODUCT MANUAL
Emb Ch 1 - Ch 16
AES Ch 1 - Ch 16
AN-AUD Ch 1- Ch 8
MONO
L
Emb Ch 12
Σ
Emb Ch 16 R
3-51