Cobalt Digital Inc 9061 Product Manual page 76

3
Table 3-2 9061 Function Submenu List — continued
Embedded Audio Group 1/2
The example above shows
various Source selections and
individual audio control settings
for various audio sources fed to
the Destination channels
Embedded Ch 1 thru
Embedded Ch 8 in Embedded
Audio Groups 1 and 2, with the
resulting setup (right).
The source-to-destination
correlation shown here is only an
example; any of the sources on
the left can connect to any of the
destinations on the right, or to
Embedded Audio Groups 3 and
4 (not shown here). Additional
sources not shown here are also
available. These are described
on the following pages.
The controls shown here are
described in detail on the
following pages.
3-32
9061 Function Submenu List and Descriptions
Selects the audio source for each embedded audio
channel 1 thru 8 (Embedded Audio Groups 1 and 2).
Also provides Gain, Phase Invert, and Muting controls
for each channel.
Embedded
Channels 1 – 16
Embed Ch 12
Embed Ch 14
AES I/O (1-4)
AES Ch 1
AES Ch 3
AES IN (5-8)
AES Ch 5
AN-AUD
IN (1-8)
AES Ch 8
Analog Ch 3
TG1
9061 PRODUCT MANUAL
+
0 dB
+
0 dB
+
0 dB
+
0 dB
+
20 dB
+
20 dB
15 dB
–
-10 dB
Embedded
Audio Group 1
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
Embedded
Audio Group 2
9061-OM (V4.9)