Cobalt Digital Inc 9061 Product Manual page 84

3
Table 3-2 9061 Function Submenu List — continued
• Mono Mix as Source
• Audio LTC as Source
• Tone Generator 1 thru 4 as Source
• Silence (Mute) as Source
• Gain (dB) Control
3-40
9061 Function Submenu List and Descriptions
(continued)
Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination AES channel.
(In this example, the mono content is the source for destination AES Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-50 for more information.
LTC selection in Source drop-down list allows any timecode format
received by the card to be outputted as audio LTC over an AES audio
output (destination) channel.
(In this example, audio LTC is the source for destination AES Ch 1)
Note: • When LTC is selected as source, Gain and Mute controls are
disabled.
• Refer to Timecode function description on page 3-46 for more
information.
Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination AES channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
AES Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-55 for
more information.
Silence selection in Source drop-down list mutes the selected destination
AES channel. Use this setting for unused destination channels.
(In this example, silence (muting) is applied to AES Ch 1)
Adjusts and displays relative gain (in dB) applied to the corresponding
destination AES channel.
(-80 to +40 dB range in 0.1 dB steps; unity = 0.0 dB)
9061 PRODUCT MANUAL 9061-OM (V4.9)