Cobalt Digital Inc 9061 Product Manual page 109

Operating Instructions
4-Character Alphanumeric Display
Item
Alphanumeric Displays 4-digit alphanumeric code indicating status or errors as follows:
Display
RMT LED Blue LED flashes when 9061 is receiving control message from remote network control (e.g., DashBoard™
or Cobalt
REF LED Blue LED illuminates indicating 9061 is receiving valid reference when set up for framesync operation.
ERR LED Red LED illuminates when 9061 unable to lock to framesync, or unable to lock to input standard.
Input Format Four blue LEDs indicate the input signal raster format being received and locked onto by the 9061 (1080,
LEDs 720, 625, 525). Continuous cycling of the LEDs indicates the 9061 has not locked onto a particular format (as
in the case of no signal input).
9061-OM (V4.9)
9061 Card Edge Status/Error Indicators and Display
Figure 3-9 shows and describes the 9061 card edge status indicators and
display. These indicators and the display show status and error conditions
relating to the card itself and remote (network) communications (where
applicable). Because these indicators are part of the card itself and require no
external interface, the indicators are particularly useful in the event of
communications problems with external devices such as network remote
control devices.
9061
• E0XX: Video Errors
• E002: Video Acquiring Lock
• E1XX: Audio Errors
• E100: Analog Input Clipping
• E2XX: Frame Sync Errors
• E200: Reference is Incompatible with Input Video
• E201: Reference Standard is Invalid/No Reference Present
• E202: Reference Standard is 720p2398 (a reference standard not supported by the framesync)
• E203: Reference Standard is 720p2997 (a reference standard not supported by the framesync)
®
Remote Control Panel)
Figure 3-9 9061 Card Edge Status Indicators and Display
Status/Error
Indicators
Function
9061 PRODUCT MANUAL
Troubleshooting
Input Format
Indicators
3-65