Cobalt Digital Inc 9061 Product Manual page 74

3
Table 3-2 9061 Function Submenu List — continued
• Current Audio Delay Display
• Video Delay Display
• Framesync Status Display
• Loss of Input Signal Selection
• Framesync LOS Freeze Color
3-30
9061 Function Submenu List and Descriptions
(continued)
Displays the current input-to-output audio delay (in msec units) as well as
in terms of Frames/fractional frame (in number of lines).
Displays the current input-to-output video delay (in msec units) as well as
in terms of Frames/fractional frame (in number of lines).
Displays the current framesync status as follows:
• Framesync status OK.
• Framesync Enable set to Off.
• Improper or missing framesync reference.
• Latency frames selection exceeds limits.
Note: See Minimum Latency Frames Control (p. 3-28) for more
information about this message.
In the event of input video Loss of Signal (LOS), determines action to be
taken as follows:
• Disable Outputs: Disable all outputs.
• Freeze Last Frame: Freeze image to last good frame (for SDI, last
frame having valid SAV and EAV codes; for analog, last frame free
of timing errors).
• Freeze to Color: Freeze image to a color raster (as selected using
Framesync LOS Freeze Color control).
Note: Freeze Last Frame and Freeze to Color choices are functional only
when frame sync is set to lock to valid reference.
In the event of LOS with Freeze to Color enabled above, sets the image
raster color from choices shown to the left.
9061 PRODUCT MANUAL 9061-OM (V4.9)