Cobalt Digital Inc 9061 Product Manual page 54

3
Table 3-2 9061 Function Submenu List
Video Signal Controls
• Input Video Preference
• HD Analog Input Type
• SD Analog Input Type
• NTSC Contains
3-10
9061 Function Submenu List and Descriptions
Sets the 9061 video signal input type and preference
and priority.
Sets the input video preference and priority for SDI and analog video
inputs as follows:
• SDI Only: Sets the video input to accept only SDI input. Blocks all
analog video inputs.
• SDI over Analog: Sets the video input to accept SDI over
composite/component analog video inputs. Blocks analog video
inputs when valid signal is received by SDI input.
• Analog Only: Sets the video input to accept only composite and/or
component analog video inputs. Blocks SDI input.
• Analog over SDI: Sets the video input to accept composite/
component analog over SDI video inputs. Blocks SDI input when
valid signal is received by composite and/or component analog
video inputs.
When receiving analog video input, sets the 9061 HD input video type to
accept received input signal from choices shown.
Note: Input type must be appropriately set for the 9061 to correctly
process the received input.
When receiving analog video input, sets the 9061 SD input video type to
accept received input signal from choices shown.
Note: Input format must be appropriately set for the 9061 to correctly
lock to the input.
This setting tells the 9061 how much setup (pedestal) needs to
be removed from an NTSC-formatted input.
• 0 IRE of Setup: No setup removed.
• 7.5 IRE of Setup: Removes 7.5 IRE of setup. This is typically
preferred when analog signals containing 7.5 IRE pedestal are
converted to SDI.
9061 PRODUCT MANUAL 9061-OM (V4.9)