Front Fender Maintenance; Center Bar Maintenance - Invacare Cetus Service Manual

Cetus
8. The entire front shroud upper cover can be
removed.
Please refer back in reverse for reassembly and
replacement.
5-4

Front fender maintenance:

Cross screwdriver x 1pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Please refer to 5-3 Front shroud upper cover
maintenance: Remove the front shroud upper
cover.
3. Remove the screws from the front shroud (M4
x 12L x 4pcs).
Please refer back in reverse for reassembly and
replacement.
Caution:
The front fender set can be removed directly
from the vehicle and without removing other
items.
S81201-92800~A
5-5

Center bar maintenance:

Hex wrench 10 x 1pcs
Hex wrench 8 x 2pcs
Hex wrench 13 x 1pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Please refer to:
5-1 Steering lever frame repair: remove the
Steering lever.
5-3 Front shroud upper cover
maintenance: remove the front shroud
upper cover.
3. Remove the coupling nut at the front wheel
connecting rod and the bottom of the center
bar.
4. Remove the clamp screws.
5. Remove the fixing screws.
6. Remove the lower steering lever connector.
7. Remove the center bar bead-bowl nut group.
Service Manual
24