Steps
1. Adhere the coin-cell battery to the slot on the palm-rest assembly.
2. Connect the coin-cell battery to the system board.
Next steps
1. Install the
card-reader
2. Install the
solid-state drive in M.2 slot
3. Install the battery.
4. Install the
base
cover.
5. Follow the procedure in
Computer base
Removing the computer base
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
wireless
card.
5. Remove the
solid-state drive from M.2 slot
6. Remove the
rear-I/O
About this task
The following image indicates the location of the computer base and provides a visual representation of the removal procedure.
46
board.
two.
After working inside your
Before working inside your
one.
cover.
computer.
computer.