Next steps
1. Install the
base
cover.
2. Follow the procedure in
Rear-I/O cover
Removing the rear-I/O cover
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the rear-I/O cover and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palm-rest assembly.
2. Disconnect the tron-light cable from the system board and peel it off from the computer base.
After working inside your
Before working inside your
computer.
computer.
37