Palm-Rest Assembly; Removing The Palm-Rest Assembly - Dell Alienware Area-51m R2 Service Manual

5. Install the display assembly.
6. Install the rear-I/O cover.
7. Install the solid-state drive interposer
8. Install the solid-state drive in M.2 slot
9. Install the solid-state drive in M.2 slot
10. Follow the procedure from step 5 to step 8 in
11. Install the solid-state drive in M.2 slot
12. Install the solid-state drive in M.2 slot
13. Install the wireless card.
14. Install the memory modules.
15. Install the battery.
16. Install the base cover.
17. Follow the procedure in

Palm-rest assembly

Removing the palm-rest assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the memory modules.
5. Remove the wireless card.
6. Remove the solid-state drive from M.2 slot
7. Remove the solid-state drive from M.2 slot
8. Follow the procedure from step 1 to step 4 in
9. Remove the solid-state drive from M.2 slot
10. Remove the solid-state drive from M.2 slot
11. Remove the solid-state drive interposer
12. Remove the card-reader
13. Remove the audio daughter-board.
14. Remove the speakers.
15. Remove the coin-cell
16. Remove the touchpad.
17. Remove the rear-I/O
18. Remove the display assembly.
19. Remove the computer
20.Remove the heat-sink
21. Remove the left power-adapter
22.Remove the system board.
23.Remove the right power-adapter
24.Remove the keyboard.
About this task
The following image indicates the location of the palm-rest assembly and provides a visual representation of the removal procedure.
76
board, if applicable.
four, if applicable.
three, if applicable.
Installing the hard
two.
one.
After working inside your
Before working inside your
one.
two.
Removing the hard
three, if applicable.
four, if applicable.
board, if applicable.
board.
battery.
cover.
base.
assembly.
port.
port.
drive, if applicable.
computer.
computer.
drive, if applicable.