Dell Alienware Area-51m R2 Service Manual page 78

2. Install the right power-adapter
3. Install the system board.
4. Install the left power-adapter
5. Install the heat-sink assembly.
6. Install the computer base.
7. Install the display assembly.
8. Install the rear-I/O cover.
9. Install the touchpad.
10. Install the coin-cell battery.
11. Install the speakers.
12. Install the audio daughter-board.
13. Install the card-reader
14. Install the solid-state drive interposer
15. Install the solid-state drive in M.2 slot
16. Install the solid-state drive in M.2 slot
17. Follow the procedure from step 5 to step 8 in
18. Install the solid-state drive in M.2 slot
19. Install the solid-state drive in M.2 slot
20.Install the wireless card.
21. Install the memory modules.
22.Install the battery.
23.Install the base cover.
24.Follow the procedure in
78
port.
port.
board.
board, if applicable.
four, if applicable.
three, if applicable.
Installing the hard
two.
one.
After working inside your
drive, if applicable.
computer.