6. Install the
solid-state drive in M.2 slot
7. Follow the procedure from step 5 to step 8 in
8. Install the
solid-state drive in M.2 slot
9. Install the
solid-state drive in M.2 slot
10. Install the battery.
11. Install the
base
cover.
12. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
wireless
card.
4. Remove the
rear-I/O
About this task
The following image indicates the location of the display assembly and provides a visual representation of the removal procedure.
three, if applicable.
Installing the hard
two.
one.
After working inside your
Before working inside your
cover.
drive, if applicable.
computer.
computer.
53