Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Follow the procedure from step 1 to step 3 in
3
Remove the
4
Remove the
5
Remove the
Procedure
1
Note the antenna cables routing and remove the antenna cables from the
routing guides on the computer base.
44
base
cover.
solid-state
drive.
wireless
card.
rear-I/O
cover.
computer. After working inside your
After working inside your
"Removing the hard
computer.
drive".