Dell Alienware Area-51m R2 Service Manual page 74

8. Follow the procedure from step 1 to step 4 in
9. Remove the solid-state drive from M.2 slot
10. Remove the solid-state drive from M.2 slot
11. Remove the solid-state drive interposer
12. Remove the rear-I/O
13. Remove the computer
14. Remove the heat-sink
15. Remove the left power-adapter
16. Remove the system board.
About this task
The following image indicates the location of the keyboard and provides a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the keyboard backlight cable from the audio daughter-board.
2. Open the latch and disconnect the keyboard cable from the audio daughter-board.
3. Remove the 57 screws (M1.2x2.5) that secure the keyboard to the palm-rest assembly.
4. Lift the keyboard off the palm-rest assembly.
74
Removing the hard
three, if applicable.
four, if applicable.
board, if applicable.
cover.
base.
assembly.
port.
drive, if applicable.