Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Remove the
3
Follow the procedure from step 1 to step 3 in
4
Remove the
5
Remove the
6
Remove the keyboard.
7
Follow the procedure from step 1 to step 8 in
8
Follow the procedure from step 1 to step 5 in
board".
9
Follow the procedure from step 1 to step 3 in
10 Follow the procedure from step 1 to step 3 in
11 Remove the
12 Follow the procedure from step 1 to step 3 in
adapter
port".
Procedure
After removing all the parts in the prerequisites, we are left with the computer
base.
computer. After working inside your
base
cover.
memory
modules.
wireless
card.
display
assembly.
After working inside your
"Removing the hard
"Removing the palm
"Removing the system
"Removing the heat
"Removing the I/O
"Removing the power-
drive".
rest".
sink".
board".
91