DIAGNOSTIC MANUAL
1. New Aftertreatment Fuel Injector
(AFI) gasket
Step
9
Do not remove the nozzle injector from the
doser housing. Spray pattern test is no
longer a visual check for Aftertreatment
Fuel Injector (AFI) replacement.
Perform Aftertreatment Fuel Injector (AFI) visual inspection.
Remove AFI (see Engine Service Manual) and check for the
following:
Visual Checks:
•
Correct AFI gasket is installed (Figure 22)
•
AFI and bore unrestricted and free of carbon buildup
•
AFI tip free of cracks and other damage
Did AFI pass all visual checks?
88
Figure 22 AFI Gasket
Action
CAUTION
https://www.truck-manuals.net/
2. Early production AFI gasket
Yes: Install AFI, and go to step 10
No: Correct failed visual check(s).
After repairs are complete, install AFI
and go to step 10.
Decision