DIAGNOSTIC MANUAL
1. New Aftertreatment Fuel Injector
(AFI) gasket
Step
13
Do not remove the nozzle injector
from the doser housing. Spray pattern
test is no longer a visual check for
Aftertreatment
replacement.
Perform Aftertreatment Fuel Injector (AFI) visual
inspection. Remove AFI (see Engine Service Manual)
and check for the following:
Visual Checks:
•
Correct AFI gasket is installed (Figure 24)
•
AFI and bore unrestricted and free of carbon buildup
•
AFI tip free of cracks and other damage
Did AFI pass all visual checks?
110
Figure 24 AFI Gasket
Action
CAUTION
Fuel
Injector
(AFI)
https://www.truck-manuals.net/
2. Early production AFI gasket
Decision
Yes: Install AFI, and go to step 14.
No: Correct failed visual check(s). After
repairs are complete, install AFI and go
to step 14.