Navistar MaxxForce DT Diagnostic Manual page 11

Step
4 Check for an engine no start. Turn ignition switch to ON position and crank
engine for a maximum of 20 seconds. If engine does not start, wait 2 to 3
minutes and crank engine again for a maximum of 20 seconds.
Does the engine start and run?
Step
5 Using Electronic Service Tool (EST) with ServiceMaxx™ software, check
Diagnostic Trouble Code (DTC) list for SPN 3719 FMI 0, 15, and 16 (DPF
Soot Load).
Is SPN 3719 or SPN 3936 with FMI 0, 15, or 16 the only fault code(s) active?
Action
Action
https://www.truck-manuals.net/
DIAGNOSTIC MANUAL
Decision
Yes: Go to step 5
No: Go to
symptom 2
(Medium Duty):
Engine No Start /
Starts and Stalls
page 17.
Decision
Yes: Go to
Symptom 3
(Medium Duty):
SPN 3719 or
SPN 3936 Active
Only or Frequent
Regens page 24.
No: Go to
Symptom 4
(Medium Duty):
SPN 3719 or
SPN 3936 and
Other Active Fault
Codes page 34.
7