Step
11B
Check for Injection Control Pressure (ICP) system issue. Using
EST with ServiceMaxx™ software, use the playback feature and
graph the following signal values from 0 to 60 mph test:
Signal Values:
•
ICP desired
•
ICP
•
Injection Pressure Regulator (IPR) valve control %
Compare snapshot to Graph 3 and associated Graph Analysis
page 54.
Is ICP system operating as per Graph 3 Graph Analysis?
Step
11C
Check for Air Management System (AMS) issue. Using EST with
ServiceMaxx™ software, use the playback feature and graph the
following signal values from 0 to 60 mph test:
Signal Values:
•
Engine Speed
•
Engine Load
•
Intake Manifold Pressure (IMP)
•
Exhaust Back Pressure (EBP)
•
Accelerator Pedal Position 1 (APP1)
Compare snapshot to Graph 4 and associated Graph Analysis
page 55.
Is AMS operating as per Graph 4 Graph Analysis?
Action
Action
https://www.truck-manuals.net/
DIAGNOSTIC MANUAL
Decision
Yes: Go to step 11C
No: Diagnose and repair ICP
system issue (See Hard Start
and No Start Diagnostics
section in Engine Diagnostic
Manual). After repairs are
complete, retest for original
problem.
Decision
Yes: Go to step 12
No: Diagnose and repair
AMS issue (See Performance
Diagnostics section in Engine
Diagnostic Manual). After
repairs are complete, retest
for original problem.
29