1. New Aftertreatment Fuel Injector
(AFI) gasket
Step
14
Do not remove the nozzle injector from the
doser housing. Spray pattern test is no longer
a visual check for Aftertreatment Fuel Injector
(AFI) replacement.
Perform Aftertreatment Fuel Injector (AFI) visual inspection.
Remove AFI (see Engine Service Manual) and check for the
following:
Visual Checks:
•
Correct AFI gasket is installed (Figure 4)
•
AFI and bore unrestricted and free of carbon buildup
•
AFI tip free of cracks and other damage
Did AFI pass all visual checks?
Figure 3 AFI Gasket
Action
CAUTION
https://www.truck-manuals.net/
DIAGNOSTIC MANUAL
2. Early production AFI gasket
Yes: Install AFI, and go to step
15
No: Correct failed visual
check(s). After repairs are
complete, install AFI and go to
step 15.
Decision
41