Power Cord Specifications - Cisco Firepower 2100 Series Hardware Installation Manual

Overview
PID
FPR2K-CBL-MGMT
FPR2K-CBL-MGMT=
FPR2K-RM-BRKT=
FPR2K-SLIDE-RAILS
FPR2K-SLIDE-RAILS=
FPR2K-RAIL-BRKT=

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note Only the approved power cords or jumper power cords provided with the security appliance are supported.
The following power cords are supported.
Figure 17: Argentina CAB-ACR
1
3
Plug: IRAM 2073
Connector: IEC 60320/C13
Description
Cable management brackets
Cable management brackets (spare)
Rack-mount brackets (spare)
Slide rail kit
Slide rail kit (spare)
Slide rail brackets (spare)
2 Cord set rating: 10 A, 250 V
Cisco Firepower 2100 Series Hardware Installation Guide
Power Cord Specifications
33