1-Gb Network Module With Hardware Bypass - Cisco Firepower 2100 Series Hardware Installation Manual

1-Gb Network Module with Hardware Bypass

Table 4: 10-Gb LR Network Module (FPR2K-NM-6X10LR-F)
Insertion loss
Cable and operating
distance
1-Gb Network Module with Hardware Bypass
The following figure shows the front panel view of the 1-Gb network module with hardware bypass
(FPR4K-NM-8X1G-F). Pair ports 1 and 2, 3 and 4, 5 and 6, and 7 and 8 to form hardware bypass paired sets.
Note Make sure you have the correct firmware package and software version installed to support this network
module.
Figure 14: FPR-NM-8X1G-F
Cisco Firepower 2100 Series Hardware Installation Guide
22
Operating Mode Typical
Normal 1.2 dB
Hardware bypass 1.5 dB
Core diameter (microns) Modal bandwidth
(MHz/km)
G.652 Single mode
Overview
Maximum
1.6 dB
1.9 dB
Cable distance
Note Half the
distance
specified by
the IEEE
standard.
5 km