Product Id Numbers; Power Cord Specifications - Cisco C395 Hardware Installation Manual

Product ID Numbers

Product ID Numbers

The following table lists the field-replaceable PIDs associated with ESA C195, C395, C695, and C695F. The
spare components are ones that you can order and replace yourself. If any internal components fail, you must
get an RMA for the entire chassis including the SFPs and SFP cables. Remove the drives and power supplies
before you send the chassis for RMA. See the
Table 4: ESA C195, C395, C695, and C695F PIDs
PID
CCS-HDD-600GB10K
CCS-HDD-600GB10K=
CCS-PSU1-770AC
CCS-PSU1-770AC=
UCSC-RAILB-M4
UCSC-RAILB-M4=
UCSC-BZL-C220M5
UCSC-BZL-C220M5=
SFP-10G-SR
SFP-10G-SR=
GLC-SX-MMD
GLC-SX-MMD=

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the ESA. The jumper power cords for use in racks are available as an optional alternative to the
standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
The following power cords and jumper cords are supported.
Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide
16
Cisco Returns Portal for more information.
Description
ESA C195, C395, C695, and C695F HDD
ESA C195, C395, C695, and C695F HDD (spare)
ESA C195, C395, C695, and C695F AC power supply
ESA C195, C395, C695, and C695F AC power supply
(spare)
ESA C195, C395, C695, and C695F rail kit
ESA C195, C395, C695, and C695F rail kit (spare)
ESA C195, C395, C695, and C695F 1 RU locking
faceplate
ESA C195, C395, C695, and C695F 1 RU locking
faceplate (spare)
ESA C695F 10-Gb SFP
ESA C695F 10-Gb SFP (spare)
ESA C695F 1-Gb SFP
ESA C695F 1-Gb SFP (spare)
Overview