Cisco Firepower 2100 Series Hardware Installation Manual page 9

Overview
Figure 1: Firepower 2110 and 2120 Package Contents
1 Firepower 2110 or 2120 chassis
3 One power cord (country-specific)
5 Two rack-mount brackets and six 8-32, 0.281-in.
screws
7 Cable management bracket kit
Two cable management brackets and four 8-32 x
0.375-in. screws
(Optional; in package if ordered)
9 Rack-mount screws:
The following figure shows the package contents for the Firepower 2130 and 2140. The contents are subject
to change and your exact contents will contain additional or fewer items depending on whether you order the
optional parts. See
2130 and 2140 package contents.
• Four 12-24, 0.75 in.
• Four 10-32, 0.75 in.
• Four M6, 19 mm
Product ID Numbers, on page 31
2 Blue console cable PC terminal adapter
4 SFP transceiver
(Optional; in package if ordered)
6 One ground lug kit
#6 AWG lug, two 10-32 x .38-in. screws
8 Start Here: Cisco Firepower 2100
This document describes how to cable and set up
your Firepower 2100 and provides links to the
documents you need to configure it.
for a list of the product IDs (PIDs) associated with the
Cisco Firepower 2100 Series Hardware Installation Guide
Package Contents
5