Mount The Chassis; Unpack And Inspect The Chassis - Cisco Firepower 2100 Series Hardware Installation Manual

Mount the Chassis

•
•
•
•
•
•

Unpack and Inspect the Chassis

Tip
Keep the shipping container in case the chassis requires shipping in the future.
Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately.
See Package Contents, on page 4
Step 1 Remove the chassis from its cardboard container and save all packaging material.
Step 2
Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Unpack and Inspect the Chassis, on page 47
Rack-Mount the Chassis Using Brackets, on page 48
Rack-Mount the Chassis Using Slide Rails, on page 50
Install the FIPS Opacity Shield in a Two-Post Rack, on page 56
Install the FIPS Opacity Shield in a Four-Post Rack, on page 59
Ground the Chassis, on page 62
C H A P T E R
for a list of what shipped with the chassis.
Cisco Firepower 2100 Series Hardware Installation Guide
3
47