Power Cord Specifications - Cisco ASA 5506W-X Hardware Installation Manual

Power Cord Specifications

Power
Temperature
Relative humidity
Maximum altitude
IP rating
Extended vibe and shock
1 Derate the maximum operating temperature 1.5 degrees C per 1000 ft above sea level.
2 Derate the maximum operating temperature 1.5 degrees C per 1000 ft above 6,000 feet elevation.

Power Cord Specifications

Note This section applies only to the ASA 5506-X and ASA 5506W-X. It does NOT apply to the ASA 5506H-X.
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Table 1: Supported Power Cords
Description
CAB-ACE
AC power cord
(Europe)
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
14
60 W (ASA 5506-X and ASA 5506W-X)
22 W (5506H-X)
Operating: 32°F to 104°F (0°C to 40°C) (ASA 5506-X and ASA 5506W-X)
-4°F to 140°F (-20°C to 60°C) (ASA 5506H-X)
Nonoperating: -13°F to 158°F (-25°C to 70°C) (ASA 5506-X and ASA 5506W-X)
-40°F to +185°F (-40° C to +85° C) (ASA 5506H-X)
Operating: 90% (ASA 5506-X and ASA 5506W-X)
Operating: 95% (ASA 5506H-X)
Nonoperating: 10% to 90%
Operating: 10,000 ft (3048 m)
Nonoperating: 15,000 ft (4572 m)
IP40 per IEC60529 (ASA 5506H-X)
IEEE1613, IEC60068-2, IEC 61850-3 (ASA 5506H-X)
Amperage Voltage
10A 250V
2
Plug Connector
CEE 7 VII IEC 60320/C13
Overview
1
Online Only