Cisco Firepower 2100 Series Hardware Installation Manual page 67

Mount the Chassis
Step 2
Insert the stripped end of the grounding cable into the open end of the grounding lug.
Figure 45: Insert the Cable into the Grounding Lug
Step 3 Use the crimping tool to secure the grounding cable in the grounding lug.
Step 4
Remove the adhesive label from the grounding pad on the chassis.
Step 5 Place the grounding lug against the grounding pad so that there is solid metal-to-metal contact, and insert the 2 screws
with washers through the holes in the grounding lug and into the grounding pad.
Figure 46: Attach the Grounding Lug
Step 6 Make sure that the lug and cable do not interfere with other equipment.
Step 7
Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your site to ensure
adequate earth ground.
Cisco Firepower 2100 Series Hardware Installation Guide
Ground the Chassis
63