Mode Setting; Off Mode; Timer Mode - AC Infinity CLOUDRAY Series User Manual

PROGRAMMING

MODE SETTING

Pressing the Mode button will cycle through the controller's available programming modes and
settings: ON Mode, OFF Mode, TIMER Mode, AUTO Mode (4 triggers), ALARM Settings (4 settings).
ON MODE
In this mode, the fans will run continuously
regardless of temperature or humidity. The
speed set in this mode will go as fast as the
fan's speed number you leave it on.

OFF MODE

In this mode, the fans will not run regardless
of temperature or humidity. While in this mode,
pressing the up or down button will change the
display's brightness. There are four settings for
brightness, (Setting:1/2/3/A3). On setting A3,
if the device is left unattended for 30 seconds,
the display will automatically dim its brightness
back to setting 1. Holding up or down button
will change the display's units F or C.

TIMER MODE

In this mode, press the up or down button to set
a time for the timer. The fans will run at the speed
set in ON Mode until the timer's clock runs out,
in which the fans will stop running. The clock will
begin counting down if no buttons are pressed
for 3 seconds. Leaving the timer mode while the
countdown is running will pause the clock until you
return to this mode.
22