Controller Settings; Display Setting; Toggling The Display - AC Infinity CLOUDLINE S4 User Manual

PROGRAMMING
T-SERIES

CONTROLLER SETTINGS

Pressing the setting button will cycle through the controller's available settings: DISPLAY, °F/ °C,
CLOCK, CALIB. T°, CALIB. H%, TRANS. T°, and TRANS. H%.

DISPLAY SETTING

Adjusts the display brightness and auto-dimming.
Press the up or down button to cycle through levels
1, 2, 3, A2 and A3; 3 being the highest brightness
setting, while 1 is the lowest. In settings 1, 2 and 3,
the display will stay at that brightness level and will
not automatically dim the display.
A2 and A3 will set the brightness level at 2 and
3, respectively, and will dim down the brightness
level 1 when the controller is not being used after
15 seconds.

TOGGLING THE DISPLAY

Lock the controller by holding the setting button.
Press the setting button to turn the display off.
Pressing the setting button again will turn the
display back on.
Programs will still run in the background while the
LCD screen is off.
46