FireClass FC503 Installation Manual page 41

In this phase the keypad and keys have the following
functions:
Alphanumeric keypad
Table 32: Alphanumeric keypad function in choose the
loop
Key Function
1 Loop 1
Loop 2
2
Loop 3
3
Cursor keys
Table 33: Cursor key functions in choose the loop
Key Function
Up No function
Down No function
Right Use to select the next available
loop
Left Use to select the previous
available loop
ESC and ENTER keys
Table 34: ESC and ENTER key function in choose the
loop
Key Function
ESC Use to delete the procedure and
return to the previous screen
ENTER
Use to accept the selection and
activate the corresponding
programming screen
The selected device field shows the currently selected device.
See Figure 25. The add field is used to enter the address of the
selected device. The scroll bar of available devices shows the
addresses and the class of all devices configured in the
selected loop.
The address of the device is represented by three digits
and the class of the device is represented by a single
character. The class of the device is either d for detector or
m for module.
Example: d087
The scroll can be viewed by using the cursor keys or
entering a device address in the add field.
Choose the device
In this phase the keypad and keys have the following
functions:
Alphanumeric keypad
Use the alphanumeric keypad to enter the address of the
selected device. If the address entered does not exist, the
next available device is selected.
Cursor keys
Table 35: Cursor key functions in choose the device
Key
Up No function
Down No function
Right Use to select the next available
device
Left Use to select the previous available
device
ESC and ENTER keys
Table 36: ESC and ENTER key function in choose the
device
Key
ESC Use to delete the procedure and
return to the previous screen
ENTER Use to accept the selection and
activate the corresponding
programming screen
Figure 25: Selecting and programming devices on the
loop
1 Access level
2 Control panel status
3 If blinking, control panel working
properly
4 Name of control panel
5 Name of loop
Function
Function
41