FireClass FC503 Installation Manual page 2

To program the fire control panel, use the Software
FireClass FC500 (FC501_FC503_FC506) Console release
01.00.01 or higher. Use control panel FW version 1.01 or
higher.
Johnson Controls assumes no responsibility for damage to
products resulting from improper application or misuse.
Installation of this control panel must take place strictly in
accordance with the instructions in this manual and in
compliance with the local laws and bylaws in force.
The FC503 and FC506 fire control panels comply with the
essential requirements of standards EN54-2, EN54-4 and
EN54-21.
Box contents
The control panel is contained in a box. See the contents
below:
•A sheet metal cabinet and plastic door with an assembled
motherboard and power supply switching.
•The Quick Start Guide.
•A transparent plastic bag containing a USB consisting of
the installation manual, user manual, the PC Programming
manual, two 3.9 kOhm resistors, a 320 mm red and a black
cable with a faston terminal to connect batteries with the
main board, and a 320 mm black cable with two faston
terminals to connect batteries.
•Proceed carefully to unpack the contents and dispose
recyclable materials in accordance with local laws.
Recycling information
The manufacturer advises that customers dispose of any
used equipment such as panels, detectors, sirens, and
other devices in an environmentally friendly manner.
Potential eco-friendly methods include reusing parts or
whole products and recycling of products, components, and
materials.
Waste Electrical and Electronic Equipment (WEEE)
Directive
In the European Union, you must dispose of this product
separate to household waste at an appropriate facility to
enable recovery and recycling.
Note: The FC503 and FC506 fire control panels support
several addressable devices such as detectors, modules,
and manual call points. The present manual includes the
instructions for the programming of the fire control panels.
For further information on these devices and their
accessories, visit www.fireclass.net and log into the
Reserved Area, under Installation Manuals.
The manufacturer reserves the right to change the technical
specifications of these products without prior notice.
Keywords and symbols
In this manual, symbols used in the margin indicate
warnings. These symbols are explained in Table 1.
Table 1: Keywords and symbols
Keyword Symbol
DANGER
WARNING
CAUTION
Explanation
Warning.
Imminent
danger.
Death or severe
injury when
disregarded.
Warning.
Potentially
dangerous
situation. Death
or severe injury
possible when
disregarded.
Warning.
Potentially
dangerous
situation. Minor
injury possible
when
disregarded.