Harmar Mobility PARAGON OUTLANDER Series Installation & Service Manual page 16

OUTLANDER VEHICLE LIFTS: SECTION 4
INSTALLATION
Power Chair Hold-Down Arm
Installation
1. Place the power chair on the lift.
2. Raise lift to the most upward position.
3. Place the power chair hold-down bar on the seat
into the cushion. Once secured, attach to outer
tube with supplied hardware. See Figure 4-14
and page 21 for adjustments.
Figure 4-14
Retractable Tie-Down Strap
Installation
1. Remove mounting hardware from strap.
2. Align the meeting position on strap to the
desired mounting point hole on the full platform.
See Figure 4-15.
Outlander Vehicle Lifts:
16
27DEC19 | 630-00133 REV A
Installation & Service Manual
Figure 4-15
3. Install the hardware.
4. Repeat process for the second and third straps.