To Change Shortcut Display; System; Use The System Softkey - NEC UNIVERGE SV9100 DT930 User Manual

1.

To Change Shortcut Display

The following explains how to change the display for
shortcuts on the Favorite screen.
(1) Display the Menu screen, and select Settings.
(2) Display Shortcut Photo & Name.
(3) Select 1 (User Settings).
(4) Select 3 (Display).
(5) Select 7 (Portal Mode Setting).
(6) Select 5 (Shortcut Photo & Name).
(7) Select a desired display method.
The default setting is 2, Photo & Name.

System

Use the System Softkey

To select the system softkey, tap the system soft key if
you are using the DT930 touch panel telephone
(ITK-8TCGX). If you are using the DT920 self labeling
telephone (ITK-8LCX), you can select system soft key
by pressing programmable key. The Up and Down
cursor keys can be used to adjust the volume when you
are using this screen.
The Left and Right cursor keys can be used to move to
Line screen.
DT930 Touch Panel Model
DT930 Self Labeling Model
55