Making/Answering Calls With A Headset; Make A Call Using A Headset; Answer A Call Using A Headset - NEC UNIVERGE SV9100 DT930 User Manual

1.
If the upload fails for reasons other than the
ones listed above, "Download Failed!" or
"Upload Failed!" displays.
Contact your system administrator.
Making/Answering Calls with a
Headset
By Using An Optional Headset, It Is Possible To
Originate Or Respond To Calls.
When Using A Headset, The On-hook/off-hook
Operation Can Be Made Using Headset/handset
Feature Key.
The feature key is set with system data setting
at initial installation.
For details, contact your system administrator.

Make a Call Using a Headset

While placing the handset on the terminal, make a call
using the headset.
(1) Press The Headset/handset Feature Key.
Headset/handset Feature Key Lamp Lights Red.
Line Key Lamp Lights Green.
(2) Dial A Desired Number.
(3) Start A Conversation After The Called Party
Answers.
(4) Press The Headset/handset Feature Key Once
Again, After Finishing A Call.
The Headset/Handset Feature Key lamp goes off.
The line key lamp light goes off.

Answer a Call Using a Headset

While placing the handset on the terminal, answer a call
using the headset.
(1) While hearing a ringing tone, press the Headset/
Handset feature key.
Feature key lamp lights red.
(2) Start conversation with the calling party.
(3) Press the Headset/Handset feature key once
again, after finishing a call.
The Headset/Handset feature key lamp goes off.
The line key lamp light goes off.
During a call in progress using the handset,
you can switch to the headset by pressing the
Headset/Handset feature key.
It is possible to answer a call by pressing line
key after pressing the Headset/Handset
feature key. You can also answer a call by
pressing the Answer key after pressing the
Headset/Handset feature key.
For details, contact your system administrator.
40