Holding A Call (Using Exclusive Call Hold); Put A Call On Exclusive Call Hold; Retrieve The Exclusive Call On Hold - NEC UNIVERGE SV9100 DT930 User Manual

1.
If the call goes unanswered after a
predetermined time, Automatic Recall is
initiated. The user hears an Automatic Recall
ringer tone. The default time frame is 90
seconds.
The time frame for the Automatic Recall ringer
tone is assigned in system data settings during
initial installation.
For details, contact the system administrator.
Holding a Call (using Exclusive Call
Hold)
You can use this feature to put a call on Hold and
exclude all other telephone users from retrieving the
held call.

Put a Call on Exclusive Call Hold

This procedure explains how to put a call, which is in
progress, on exclusive call hold.
(1) While a call is in progress, the Line key that is
used during the call lights green. The Line key on
other telephones lights red.
(2) Press the Feature key.
The Feature key lamp lights red.
(3) Press the Hold key.
The Line key, which is on hold, flashes green.
The Line key on other telephones light red (the
ITK-8TCGX telephone lights green).
The Feature key lamp goes off.
(4) Replace the handset.

Retrieve the Exclusive Call on Hold

This procedure explains how to retrieve a call that was
previously put on exclusive call hold.
(1) While the call is holding, the Line key that is used
to place the caller on hold flashes green.
(2) Press the Line key that is on hold.
The Line key lamp that was placed on hold lights
green.
The Line key on other telephones lights red.
(3) Lift the handset and return to the held call.
Only the terminal where Exclusive Hold is set
can retrieve the call.
If the call goes unanswered after a
predetermined time, Automatic Recall is
initiated. The user hears an Automatic Recall
ringer tone. The default time frame is 90
seconds.
The time frame for the Automatic Recall ringer
tone is assigned in system data settings during
initial installation.
For details, contact the system administrator.
62