Edit Shortcut - NEC UNIVERGE SV9100 DT930 User Manual

1.
(3) The calling screen is displayed.
When you start talking with the called party, the
following screen is displayed.
(4) End the call by returning the handset in the cradle
or pressing the Speaker key.
To upload an image to a shortcut, refer to the
Appendix To Upload an Image.

Edit Shortcut

❍
The shortcut types cannot be edited using
this method. Only the shortcut
information registered by entering can be
edited.
To change the shortcut type, delete the
shortcut and register again. For register
or delete shortcut, refer to
Shortcut on page 49
on page
❍
The Redial shortcut cannot be edited.
(1) Select a registered shortcut.
Select a registered shortcut using a long press
(long tap).
How to Select by Long Press:
❍
DT930 (Touch panel model)
Long press the shortcut. Only when the
item is selected, the orange focus is
displayed until the screen transitions to
the next screen.
❍
DT920 (Self labeling model)
Long press the programmable key on the
sides of screen.
(2) Select Edit Shortcut.
The option menu is displayed, select Edit
shortcut.
(3) Select Data.
The Data select screen is displayed. Select the
data to be edited.
(4) Edit the data.
Edit the registered information and press Enter or
the local Soft key 4.
52
Register a
or Delete a Shortcut
53.