Section 4 Feature Operation; Login; Logoff - NEC UNIVERGE SV9100 DT930 User Manual

1.
4
Feature Operation
This chapter describes how to login/logout, how to input
characters and make a call, put a call on hold, etc.

Login

When login mode is activated, the telephone prompts
for Login ID and Password. When the telephone starts,
Login Mode is activated.
(1) Enter Login ID and press the Set softkey.
At initial setting, enter the extension number
as the Login ID.
A maximum of 16 characters can be entered
for the Login ID.
(2) Enter a password and press the OK softkey.
(3) If the Login ID and password is accepted, the
display changes to normal idle status. The
telephone is logged in.
If you enter an incorrect Login ID and
Password, the normal screen is not displayed;
the display returns to the Login screen.
Enter the correct Login ID and Password.

Logoff

The terminal, which is operated with Login Mode, can
log out. The following is an example fore the
ITK-8TCGX terminal. If sing the ITK-8LCX terminal,
apply the programmable key.
(1) When login Press system softkey
(2) Press system softkey Prog.
59
↓
.