Use Multiple Ssids On The Zyxel Device; Configure Security Settings Of Multiple Ssids - ZyXEL Communications LTE Series User Manual

If the wireless client keeps trying to connect to or acquiring an IP address from the Zyxel Device, make
8
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the Zyxel
Device.
If your connection is successful, open your Internet browser and enter
of any other website in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.

4.4 Use Multiple SSIDs on the Zyxel Device

You can configure more than one SSID on a Zyxel Device. See
This allows you to configure multiple independent wireless networks on the Zyxel Device as if there were
multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That is, each SSID on
the Zyxel Device represents a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the Zyxel Device (such as a
printer).
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for
guests and C is specific to a VoIP device in the meeting room.

4.4.1 Configure Security Settings of Multiple SSIDs

The Zyxel Device is in router mode by default.
Chapter 4 Tutorials
LTE
LTE Series User's Guide
54
http://www.zyxel.com
Section 7.3 on page 104.
or the URL