Upnp - ZyXEL Communications LTE Series User Manual

Table 43 Static DHCP: Configuration
LABEL
OK
Cancel

8.4 UPnP

Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See Section 8.6 on page 140
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 93 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 44 Network Settings > Home Networking > UPnP
LABEL
UPnP State
UPnP
UPnP NAT-T State
Chapter 8 Home Networking
DESCRIPTION
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the Web Configurator's login screen without entering the Zyxel Device's IP address (although
you must still enter the password to access the Web Configurator).
LTE Series User's Guide
138