Pin Configuration - ZyXEL Communications LTE Series User Manual

4.2.2 PIN Configuration

When you use the PIN configuration method, you need to check the client's PIN number and use the
Zyxel Device's configuration interface.
Go to your phone settings and turn on WiFi. Open the WiFi networks list and tap WPS PIN Entry to get a
1
PIN number.
Enter the client's PIN number in the PIN field in the Configuration > Network Setting > Broardband >
2
Cellular SIM screen on the Zyxel Device.
Click Start button (or the button next to the PIN field) on the Zyxel Device's Cellular SIM screen within two
3
minutes.
The Zyxel Device authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
Zyxel Device securely.
The following figure shows you the example to set up wireless network and security on Zyxel Device and
wireless client (ex. the Android smartphone in this example) by using PIN Method.
Chapter 4 Tutorials
LTE Series User's Guide
50