Navigating Between Modes; Cycling Between Timekeeping Mode Digital Display Contents; Shifting Hands To Read The Digital Display; Viewing The Face In The Dark - Casio 5690 Operation Manual

Navigating Between Modes

Each press of (C) cycles between watch
modes.
In any mode, hold down (C) for at least one
●
second to return to the Timekeeping Mode.
Timekeeping Mode
C
Mode hand
Alarm Mode World Time Mode
C
Timer Mode Stopwatch Mode
C
Connecting with a Phone
●
Hold down (C) for at least three seconds to
connect with a phone.
To disconnect, press any button.
●
Before connection After connection
C
Any button
Watch Operation Guide 5690
Cycling Between
Timekeeping Mode Digital
Display Contents
Each press of (A) in the Timekeeping Mode
toggles between the display information as
shown below.
When the watch is not paired with a
●
phone
Day of the week, date
C
Seconds
When the watch is paired with a phone
●
Day of the week, date
C
Seconds
To return to normal timekeeping from the
●
app info screen, press (C) or (D).
Important!
To receive CASIO WATCHES
●
information, you need to turn on the
app info receive setting.
Receiving CASIO WATCHES
l
Information On the Watch
App Info Screen
The app info screen shows information
●
received when the watch connects with a
phone to adjust its current time setting. This
screen shows CASIO WATCHES update
and other information.
When CASIO WATCHES information is
●
received while the watch is in the
Timekeeping Mode, the watch
automatically switches to the app info
screen.
The app info screen automatically returns to
●
the normal timekeeping screen at midnight.
Shifting Hands to Read the
Digital Display
Hand shift moves the hands out of the way for
easy viewing of display information.
1.
While holding down (B), press (C).
This will shift the analog hands to allow
●
easy viewing of display information.
Hours, minutes
2.
To return the hands to their normal
timekeeping positions, hold down (B) as
you press (C) again, or press (C) to
change to another mode.
Note
Hours, minutes
If you leave the watch with its hands
●
shifted and do not perform any
operation for about one hour, the
hands will resume normal timekeeping
automatically.
App Info Receive

Viewing the Face in the Dark

The watch has an LED light that you can turn
on for reading in the dark.
Turning On Illumination
●
Press (B) to illuminate the face and digital
display.
Illumination will turn off automatically if an
●
alarm starts to sound.
Illumination is disabled while the hands are
●
moving at high speed.
The light may flicker when it turns on or off.
●
Important!
Frequent use of illumination runs down
●
the battery.
7